TEAC TN-400BT-SE Walnut Analog Turntable with Bluetooth®

Analog turntable with Bluetooth® Qualcomm® aptX™ transmitter that streams music from LP Records wirelessly
Features at a glance

• Robust high-density MDF plinth provides both vibration isolation and elegance
• Available in a selection of contemporary matt finishes, or a natural walnut veneer
• 3-speed belt-drive mechanism with aluminum die-cast platter (33-?, 45, 78 rpm)
• Low-resistance spindle for stable rotational speed
• Static-balanced S-shaped tone-arm with universal-type headshell
• Pre-installed MM-type AT95E cartridge from audio-technica
• Built-in Phono EQ Amplifier
• High-quality Bluetooth® Qualcomm® aptX™ wireless audio transmission
• Floating-construction using decoupled feet provides high feedback resistance
• Machined aluminum operation knobs and feet
• Gold-plated RCA jacks (for LINE/PHONO output) and tone-arm contacts
• GND terminal on rear panel
• RCA audio cable with GND wiring included

Aluminum die-cast platter with 3-speed belt-drive
A die-cast, high-inertia aluminum platter is driven by a high-torque DC motor via a durable rubber flat-belt, giving immensely stable playback at 33-?, 45 and 78 rpm speeds.

New low-resistance spindle
A precisely-machined stainless steel spindle and durable brass bearing maintain accurate rotational speed, thanks to reduced friction.

Natural walnut veneer finish with laser-engraved logo
The TN-400BT-SE is available in natural varnished walnut veneer finish with laser-engraved TEAC logo.

Built-in Phono EQ amplifier
The TN-400BT-SE has an onboard Phono EQ amplifier that supports MM-type cartridges, allowing the deck to be connected to conventional amplifiers/micro systems that lack a dedicated turntable input. The Phono EQ amplifier employs a hi-fi quality NJM8080 op-amp chip (designed by JRC) which amplifies the tiny audio signal from the stylus with the minimum of distortion.

S-shaped static-balanced tone-arm
The S-shaped, static-balanced aluminum tone-arm is equipped with a counterweight and anti-skating mechanism that allow an exact setting of balance as well as tracking pressure, ensuring accurate tracking during playback. A tone-arm lifter is also fitted for smooth lowering of the tone-arm onto records.

Bluetooth® wireless audio streaming with Qualcomm® aptX™ codec
The TN-400BT-SE's Bluetooth® wireless transmission system supports the higher quality Qualcomm® aptX™ and AAC codecs, as well as the conventional SBC codec. This means that even if users don't have a hi-fi system, then can still enjoy truly high-quality vinyl replay via Bluetooth®-equipped headphones or speakers.

Beautifully detailed
The TN-400BT-SE brings elegance to the process of playing a record. The machined aluminum operation knobs ooze quality while the aluminum feet, attached to high-density MDF chassis via shock-absorbing rubber, provide a high resistance to feedback.

MM-type Cartridge from audio-technica
The deck comes with an excellent, all-purpose MM cartridge, employing a lightweight aluminum cantilever, which helps deliver an accurate, highly musical standard of playback.

Spec description
 

Turntable section
Type	Belt Drive
Motor	DC Motor
Rotation Speeds	33-1/3, 45, 78 rpm
Wow-and-Flutters	0.2%
S/N Ratio	more than 67dB (A-weighted) 60dB (unweighted, 20kHz, LPF)
Turntable (Platter)
Material	Aluminum Die-cast
Diameter	30cm
Tone-arm section
Type	S-shaped, Static-balanced
Effective Length	223mm
Needle Pressure Range	0g to 5g
Compatible Cartridge Weight	3g to 7g 14g to 18g (including Head-shell)
Type	S-shaped, Static-balanced
Effective Length	223mm
Needle Pressure Range	0g to 5g
Compatible Cartridge Weight	3g to 7g 14g to 18g (including Head-shell)
Head-shell and Cartridge sections
Model of Cartridge	audio-technica AT95E
Type of Cartridge	MM-type (VM-type)
Frequency Response	20Hz to 20,000Hz
Output Voltage	3.5mV (1kHz, 5cm/sec.)
Channel Separation	20dB (1kHz)
Output Balance	2.0 dB (1kHz)
Needle Pressure	1.5g to 2.5g (appropriate value: 2.0g)
Needle Life	approx. 300 hours (depends on conditions)
Coil Impedance	2.8kohms (1kHz)
DC Resistance	410ohms
Loading Resistance	47kohms
Loading Capacity	100 to 200pF
Coil Inductance	400mH (1kHz)
Static Compliance	20 x 10-6cm/dyne
Dynamic Compliance	Joint-oval 0.3 x 0.7mil
Cantilever	Aluminum Pipe
Vertical Tracking Degree	20 degrees
Overall Dimensions	17.0(W) x 17.2(H) x 30.5(D) mm
Weight	5.7 g
Head-shell Weight	11g (including nuts, screws, and wires)
Analog Output section
Connectors	RCA jack ? 1 pair (Gold-plated)
Output Voltage
PHONO	3.5mV +/-3dB
LINE	155mV (-16dBV)
Bluetooth® section
Bluetooth version	4.0 (DUAL MODE)
Output class	Class 2
Codecs	SBC, AAC, Qualcomm® aptX™
Maximum number of stored pairings	8 devices
Operation Power
AC Adapter Input	AC 100 - 240V, 50/60Hz
AC Adapter Output	DC 12V 500mA
Power Consumption	1.5W or less
Standby Power	0.5W or less
Dimensions (including protrusions)	420(W) ? 117(H) ? 356(D) mm / 16.5"(W) ? 4.6"(H) ? 14.0"(D)
Weight	4.9kg / 10.8lbs

Included Accessories : 
Felt Mat, EP Adapter, Counter Weight, Headshell (audio-technica A